Corrugated steel sheet T12 is made of steel sheet, galvanized on both sides and protected with polyester.

It is used for partitioning spaces for constructions, production, warehousing, for the delimitation of opened construction spaces (shelters, warehouses, terraces etc.), for decorating interior and exterior ceiling surfaces, for fences, household annexes etc.

Production specifications

• BILKA T12 corrugated steel sheet is made with a nominal thickness between 0.3 – 0.4 mm, based on the construction requirements.
• The standard length of the modules ranges from 0.500 m and 13.5 m. Execution of the modules with different lengths from the standard ones will be made after prior consultation with the technical specialist from BILKA.
• Bilka T12 corrugated steel sheet is profiled in two options: from raw material with a width of 1250 mm and from raw material with a width of 1000 mm.

Technical specifications

Product description

T200 BILKA corrugated sheet metal is manufactured in steel sheet, galvanized on both sides and protected with polyester. It is used for small inclination roofs and intermediate floors.

It is the ideal and economical solution for construction and rehabilitation of facilities intended for warehouses, shopping centers, production facilities, farms, silos, stables, sports centers, etc.

Production Specifications

• BILKA T200 corrugated steel is made with a nominal thickness between 0.75 – 2.5 mm, based on the construction requirements
• The standard length of the modules ranges from 0.500 m and 13.5 m. Execution of the modules with different lengths from the standard ones will be made after prior consultation with the technical specialist from BILKA
• Available in a wide range of colors

Technical characteristics

Product description

T153 BILKA corrugated sheet metal is manufactured in steel sheet, galvanized on both sides and protected with polyester. It is used for small inclination roofs and intermediate floors. It is the ideal and economical solution for construction and rehabilitation of facilities intended for: warehouses, shopping centers, production facilities, farms, silos, stables, sports centers, etc.

Production specifications

• BILKA T153 corrugated sheet metal is made with a nominal thickness between 0.75 – 1,25 mm, based on the construction requirements
• The standard length of the modules ranges from 2 m and 15 m. Execution of the modules with different lengths from the standard ones will be made after prior consultation with the technical specialist from BILKA.

Technical characteristics

Product description

The corrugated metal sheet T85 is especially used in constructions of industrial used (warehouses, industrial, commercial constructions, etc). It is used as a support for terrace roofs inclined up to 5°, in combination with insulation and final roofing products. The corrugated metal sheet T85 is used by builders and for the intermediate floors in multi-level buildings. The height of the corrugation is 85 mm.

Production Specifications

• BILKA T85 corrugated sheet metal is made with a nominal thickness between 0.75 – 2.5 mm, based on the construction requirements
• The standard length of the modules ranges from 0.500 m and 13.5 m. Execution of the modules with different lengths from the standard ones will be made after prior consultation with the technical specialist from BILKA
• Available in a wide range of colors

Technical characteristics

Product description

The corrugated steel sheet T60 is especially used in constructions of industrial used (warehouses, industrial, commercial constructions, etc). It is used as a support for terrace roofs inclined up to 5°, in combination with insulation and final roofing products. The corrugated metal sheet T60 is used by builders and for the intermediate floors in multi-level buildings.

Production specifications

• BILKA T60 corrugated steel sheet is made with a nominal thickness between 0.5 – 2.5 mm, based on the construction requirements
• The standard length of the modules ranges from 0.500 m to 13.5 m. Execution of modules with different lengths from the standard ones will be made after prior consultation with BILKA specialist.
• Available in a wide range of colors

Technical characteristics

Product description

T45 BILKA corrugated sheet metal is manufactured in steel sheet, galvanized on both sides and protected with polyester. It is used for small inclination roofs and intermediate floors.

It is the ideal and economical solution for construction and rehabilitation of facilities intended for warehouses, shopping centers, production facilities, farms, silos, stables, sports centers, etc.

Production specifications

• BILKA T45 corrugated sheet metal is made with a nominal thickness between 0.4 – 1 mm, based on the construction requirements
• The standard length of the modules ranges from 0.500 m and 13.5 m. Execution of the modules with different lengths from the standard ones will be made after prior consultation with the technical specialist BILKA.
• BILKA produces corrugated steel sheet in a wide range of colors

Technical characteristics

Product description

T35 BILKA corrugated sheet metal is manufactured in steel sheet, galvanized on both sides and protected with polyester.

The high-quality raw materials allow the use of metal sheet in the façade covering especially of commercial and industrial buildings. It can be mounted on the roof as a coating. The height of the corrugation is 35mm.

BILKA also produces the T35 corrugated steel sheet with DR!PSTOP, which is a special anti-condensation membrane that is fixed onto the inner side of the metal panel during the automatic manufacturing process. Thanks to the interlaid polyester fibers used for its manufacturing, this membrane enables the control of the condensation on metal panels. The material is capable of absorbing the condensate drops which subsequently evaporate into the air.

Production specifications

• BILKA T35 corrugated sheet metal is made with a nominal thickness between 0.4 – 1 mm, based on the construction requirements
• The standard length of the modules ranges from 0.500 m and 13.5 m. Execution of the modules with different lengths from the standard ones will be made after prior consultation with the technical specialist from BILKA.
• BILKA produces corrugated steel sheet T35 in a wide range of colors

Technical characteristics

Product description

The sheet metal S18 Sinus is used for the construction and renovation of civil, industrial and agricultural buildings, both for the roof and interior and exterior walls. It is the ideal solution for short term delivery buildings, low-budget and superior aesthetic requirements buildings.

Production specifications

• BILKA S18 Sinus corrugated sheet metal is made with a nominal thickness between 0.4 – 0.6 mm, based on the construction requirements

• the standard length of the modules ranges from 0.500m to 13.5 m. Execution of modules with different lengths from the standard ones will be made after prior consultation with BILKA specialist.

• wide range of colors

Technical characteristics

Product description

Corrugated steel sheet T8 is made of steel sheet, galvanized on both sides and protected with polyester.

It is used especially for facades, fences or ceilings but can be mounted on the roof as covering.

Production specifications

• BILKA T8 corrugated steel sheet is made with a nominal thickness between 0.3 – 0.6 mm, based on the construction requirements

• The standard length of the modules ranges from 0.500 m and 13.5 m. Execution of the modules with different lengths from the standard ones will be made after prior consultation with the technical specialist from BILKA.

• wide range of colors

Advantages

• easy assembly requires a low number of supporting elements
• behaves well in time and is weather resistant
• long life duration
• low weight does not load the foundation

Technical characteristics

Product description

T18 corrugated steel sheet is manufactured in steel sheet, galvanized on both sides and protected with polyester.

It is used especially on facades, fences or ceilings but can be mounted on the roof as covering.

Production specifications

• BILKA T18 corrugated sheet metal is manufactured with a nominal thickness between 0.4 – 0.7 mm, based on the construction requirements, the standard length of the modules ranges from 0.500 m and 13.5 m. Execution of modules with different lengths from the standard ones will be made after prior consultation with BILKA specialist.

• corrugated sheet metal modules are manufactured at a nominal width of 1,000 and 1,150 mm.

• corrugated sheet metal is profiled in two options: with folds outward for facade and folds inward for the roofs

• wide range of colors

• T18 P for facade
• T18 A for the roof

Technical characteristics