Request offer Dripstop Membrane
Dripstop Membrane
DR!PSTOP Membrane is a special membrane which solves the problem of condensation on uninsulated metal roofs.
When the temperature and humidity conditons reach the dew point, moisture condenses on the under side of the untreated metal roof and forms droplets of water which can cause damage to the contents of the building below. DR!PSTOP membrane holds that moisture until conditions go back below the dew point, then the moisture simply evaporates back into the air.
The DR!PSTOP membrane is a self adhesive membrane applied to the Bilka metal sheet during the profiling process. The product is a self adhesive membrane, made of a large number of interlayered PES fibres, between which there is enough space to store water droplets. The membrane serves as a medium for absorbing water droplets from the condensation, which then evaporates into the air. Air circulation (ventilation) is important in this process.
Advantages:
- Resistance
- Water absorption
- Additional sound insulation
- Noise reduction
- Resistance to bacteria
- Can be used with most Bilka roofing panels
| Product Name: | Dripstop Membrane | |
| Color | Grey | |
| Raw material | PES/PE/synthetic rubber | |
| Treatment | self-adhesive | |
| Weight (g/m²) | EN 29073 - 1 | 95 (+/-10%) g/m² |
| Thickness | EN ISO 9073-2 | < 1 mm |
| Inflammability | EN 13501-1 | A2 - s1, d0*¹ |
| Peel adhesion | 10*¹ N/25mm | |
| Peel adhesion after ageing | improved | |
| Water absorption | 2500*1 g/m² | |
| Water absorption 0º | FILC int. 19 | 900*¹ g/m² |
| Water absorption 45º | FILC int. 19 | 700*¹ g/m² |
| Water absorption 90º | FILC int. 19 | 500*¹ g/m² |
| Water absorption | NF P 15-203-1 | 600*¹ g/m² |
| Sound absorption | EN ISO 354 | 0,02 - 125 Hz 0,04 - 500 Hz 0,04 - 1000 Hz 0,12 - 2000 Hz 0,42 - 4000 Hz |
| Heat transfer capacity | DIN 52612 | 0,038 W/mK |
| Resistance to bacteria | DIN EN 14119 | Index 0 |
Storage and warehousing rules:
The product should be stored in a dry, closed space, without exposure to direct sunlight, in the original packaging, closed and undamaged.
Period of use:
The product must be protected from chemical agents, in particular solvent-based substances which may affect the technical parameters or permanently destroy the product.
Possible risks, prevention prescriptions:
There is no risk of endangering health.