CLASIC Metallic Tile
CLASIC Metallic Tile is profiled of zinc coated 0,50 mm thickness steel, (Z200-Z275), covered with a layer of sheen or dull type paint. This type of metallic tile is the most often used, it’s similar to classical tiles and it’s used for residential buildings.
The metallic tile panels can be delivered with lengths between 500 mm and 7000 mm.
For very large water lengths, where coverage using only one tile panel isn’t recommended, two or several metallic tile panels must be used.
This aspect envisages numbering the panels of the inferior side as multiple of tiles, taking into account a technical overlap of 150 mm.
Technical |
|
| Material | Steel sheet, zinc coated on both sides, polyester protected |
| Nominal thickness | 0,5 mm steel sheet |
| Total width | 1200 mm |
| Net coverage width | 1120 mm |
| Module’s length | 350 / 400 mm |
| GLoad per surface | approximately 5 kg / sq.m |
| Minimum slope | 8⁰ if diagonal joints are necessary / 14⁰ for diagonal joints e |
| Warranty | 10 years of warranty against corrosion |
| Expected service life | 50 - 60 years for the roof |
Products
Comunicate
ISO 9001:2008 Certificate
